Turbo Pressure Blowers

Turbo Pressure Blower wheels come in 5 types for various applications and can also be used in High Temperature, Spark Resistant, and Corrosion Resistant applications,when requested. All Turbo Pressure Blowers are constructed with heavy gage continuously welded housings. All wheels are dynamically balanced to assure smooth operation, and Teflon shaft seals are standard. American Fan Turbo Pressure Blowers have heavy-duty anti-friction pillow block ball bearings, and can develop pressures to 110" S.P.W.G., with capacities to 8000 CFM.

		AVP - Turbo Pressure Blower Cast Almag radial open design for light material handling applications. AVP is ideal for the textile industries' lint conveying applications where AMCA Type "B" spark resistant construction is required. AVP blower wheels are available in 17" through 23" diameters. AVP Fans can develop a MAX CFM of 8000 with MAX SP (in wg) of73 Success Stories AVP Turbo Pressure Blowers - Power Facilities - Material Handling Aviation
		BC - Backwardly Inclined Blower High efficiency backwardly inclined airfoil bladed blower wheel is designed for clean, dry air applications, exhibiting non-overloading horsepower characteristics and stable performance over the entire pressure curve. High efficiency backwardly curved single thickness wheel has a blade shape similar to the convex shape of the BCA airfoil wheel. This shape provides nearly identical performance characteristics at a given speed at a slightly lower efficiency. Noise levels are the lowest in the peak efficiency range of the performance curve. Class 3 wheels utilize internal blade stiffeners for higher tip speed capability. AMCA certified for sound and performance. 14 fan sizes from 12-1/4" through 66" diameter wheels, in Class I, II, III construction. Success Stories BCA 300 - Oil Refinery BCA 330 - Building Exhaust BCA 402 - Solvent Recovery BCS 245 - Gas Turbine Cooling BCS 270 - Automobile Manufacturing BCS 445 - Radioactive Waste
		N - Turbo Pressure Blower High pressure, low flow open design blower wheel. Good for light material handling applications N wheels are available in cast aluminum in 16" through 26.5" diameters and welded steel 28.1" through 31.5 diameters. Success Stories Cement Industry
		OVP - Turbo Pressure Blower Our OVP fans are made with heavy gauge continuously welded housings, reversible and rotatable. They have round inlet and outlet flanges drilled to match ANSI 150# pipe flanges (outlet flanges standard), and have dynamically balanced blower wheels to assure smooth operation. OVP Fans can develop a MAX CFM of 8000 with MAX SP (in wg) of73 Success Stories OVP 3 - Conveying OVP 6- Textiles
		RB - Pressure Blower RB Pressure Blowers offer a large variety of pressure capabilities in "direct drive" and "belt driven", due to multiple housing and blower wheel design. the versatile design of our RB Pressure Blowers offer higher pressures than most turbo pressure blowers, with a MAX CFM of 12,000 and a MAX SP (in wg) of 110. Success Stories RB-351- With Sound Blanket RB-352 - Petroleum Industry RB-355 -Temperature Control @ Power Facility RB-451 - Environmental RB-454 - Coal Fired Power Plants